ISOCOAT is a decorative finishing coat, or a protective shield enveloping spray-applied fibre insulation.
It consists of a paste-like coating that thickens when it dries thus forming a topcoat.
...Read more
ISOFILM is an aqueous dispersion of inorganic resins.
It consists of a finishing product that hardens upon drying after impregnating the mineral fibre.
...Read more
ISOFIX BT-T is an aqueous formulation consisting of a vinyl binding agent and special additives.
This organic adhesive has been developed to fix spray-applied rock wool with inorganic binders, on all types of concrete surfaces.
...Read more
ISOFIX PLUS is an aqueous formulation containing acrylic polymers in suspension.
This organic adhesive has been developed to fix spray-applied rock wool with inorganic binders, on all surfaces that are either delicate or difficult to treat with the usual methods.
...Read more
ISOFIX TS is an aqueous formulation containing acrylic polymers in suspension.
This organic adhesive has been developed to fix spray-applied rock wool with inorganic binders, on metallic or concrete surfaces.
...Read more
ISOFLAM SM is a slag mineral wool-based product applied using a spray gun which, after the creation of a bond using ISOFIX primer, forms passive fire protection on various concrete, metal, timber floor, composite decking and horizontal membrane structures.
ISOFLAM SM has acoustic absorbent
...Read more
ISOGAINE is a fibrous product made of mineral wool slag, hydraulic binders and additives. Applied wet by direct spraying onto the surface requiring protection (after the creation of a bonding bridge using our primers ISOFIX TS or TS-M), it is designed to provide passive protection against fire
...Read more
ISOTHERM is a slag mineral wool-based product applied using a spray gun which, when applied on a bonding coat of ISOFIX primer, will create a thermal insulation barrier when sprayed directly onto the component to be insulated, and also provide passive fire protection of different concrete
...Read more
The use of a primer coat is obligatory on all supports (except when applying directly on mesh or mat type reinforcement, or expanded metal sheet).
The primer coat ensures the adherence of the finish. It forms part of the system (see DTU 27-1, AFNOR standard P 15-202-1, article 4.2).
Prior to
ROKISOL P is a paste-like premixed product consisting of vermiculite, plaster and additives.
Applied wet by direct spraying onto the surface requiring protection (after the creation of a bonding bridge using our primer ISOFIX TS), it is designed to provide passive protection against fire
...Read more
Our ISOTHERM and ISOFLAM products are designed to take the top coat suited to the performances, type of finish and application required:
- Impregnation surface hardener : ISOFILM
- Or decorative render : ISOCOAT
...Read more
